• 1.5 thru 5 Tons

ALL MODELS

• 1−1/2 thru 5 tons
• Environmentally Sound R−410A systems
• WAHM models have Plain copper tubes and aluminum fin coil
• WAHT models have Tin−coated copper tubes and aluminum fin coil. These coils are built with special
  hairpins which are tin−coated to resist both general pitting corrosion and excessive Formicary Corrosion
  (indoor corrosion, an industry phenomenon).
• Multiposition installation − Upflow or horizontal left standard.
  − Horizontal right with minor modification and required Horizontal Gasket Kit.
  − Field convertible to downflow with required Horizontal Gasket Kit and available accessory kit.
• TXV metering device factory installed
• Sweat connections
• Primary and secondary drain fittings with brass inserts
• 5 amp automotive type fuse Multiple electrical entry locations
• Time delay relay (TDR)
• Field installed heater packages from 5 kW − 30 kW available separately
• HUD approved for manufactured housing
• 208/230−1−60 supply voltage
• Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  1 inch (25mm) thick insulation with R value of 4.2
• High efficiency ECM, 3−speed Motor
• No Heat Kit factory installed
• Factory installed washable permanent filter

LIMITED WARRANTY

• 5 year parts (with an additional 5 years parts if properly registered) limited warranty to the original
  purchaser only for owner−occupied dwellings − see warranty certificate for details.

• 1.5 thru 5 Tons

ALL MODELS

• 1−1/2 thru 5 tons
• Available for environmentaly sound R-410A system 
• Factory installed piston metering device with Teflon ring (TXV on 5 Ton)
• Copper tube/ aluminum fin coil on standard models
• Available with industry exclusive tin coated copper main tubing for additional corrosion protection
• Sweat connections
• Primary and secondary drain fittings
• Multiple electrical entry locations
• Time delay relay (TDR)
• Field installed heater packages from 5 kW - 30 kW available seperately
• HUD approved for manufactured housing
• 208/230-1-60 supply voltage
• Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
• 1 inch thick insulation with R value of 4.2
• Filter (washable) available as accessory

WAP(M,T)

• ECM 5 - speed motor
• Multiposition installation - upflow or horizontal left standard, horizontal right with minor modification ( field convertible to downflow with available accessory kit)
• Low Voltage circuit protective fuse (3amp) inline on wire harness
• No heat (Plug) Kit factory installed

Warranty

• 5 or 10 year parts limited warranty
• (With timely registration, an additional 5 year parts limited warranty
• Applies to the original purchaser/homeowner, some limitations may apply.  See warranty certificate for complete details.

 

• 1.5 thru 5 Tons

ALL MODELS

• 1−1/2 thru 5 tons
• Environmentally Sound R−410A systems
• WAXM models have Plain copper tubes and aluminum fin coil
• WAXT models have Tin−coated copper tubes and aluminum fin coil. These coils are built with special
  hairpins which are tin−coated to resist both general pitting corrosion and excessive Formicary Corrosion
  (indoor corrosion, an industry phenomenon).
• Multiposition installation − Upflow or horizontal left standard.
  − Horizontal right with minor modification and required Horizontal Gasket Kit.
  − Field convertible to downflow with required Horizontal Gasket Kit and available accessory kit.
• TXV metering device factory installed
• Sweat connections
• Primary and secondary drain fittings with brass inserts
• 3 amp automotive type fuse Multiple electrical entry locations
• Multi electrical entry locations
• Time delay relay (TDR) programmed in motor
• Field installed heater packages from 5 kW − 30 kW available separately
• HUD approved for manufactured housing
• 208/230−1−60 supply voltage
• Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  1 inch (25mm) thick insulation with R value of 4.2
• High efficiency ECM motor 
• No Heat (Plug) Kit factory installed
• Filter (washable) factory supplied

LIMITED WARRANTY

• 5 year parts (with an additional 5 years parts if properly registered) limited warranty to the original
  purchaser only for owner−occupied dwellings − see warranty certificate for details.